I accidentally flushed the toilet paper roll holder (the wooden peg that goes through the roll). How to fix?! - wooden toilet roll holder
I accidentally pressed the wooden stick that goes through the roll of toilet paper attached to the bearer. It is a long wooden dowel about 5 cm with a spring in the middle so that the recording compression to 3-4 cm. Now, slowly enters the room, and then bowl only a very small amount. I tried to topple the toilet and winds, but has no effect. I want to avoid calling a plumber if possible. All that would offer you advice on how to solve the problem will be greatly appreciated. Step-by-step instructions would be very helpful. Thank you!
Monday, January 18, 2010
Wooden Toilet Roll Holder I Accidentally Flushed The Toilet Paper Roll Holder (the Wooden Peg That Goes Through The Roll). How To Fix?!
4 comments:
You have to swim to say separately (outside the plant). You will need a wax ring) (at your local hardware store.
Empty the water tank and turn on the water.
Loosen the lug nuts holding the toilet.
Get the bathroom and put her head.
Remove the cap in hand (yes, he is evil, gloves)
The selection of the ringing of the wax over the hole in the ground
Place the pan just the wax ring and make sure the bathroom is perfectly well otherwise escapes
Tighten the screws
open water back.
VOILA!
I see only two possibilities.
1) Remove the bowl and give try to get the plug, or be
2) Call a plumber.
Each option can lead to having to buy a new toilet, it's just that Option 1 is much cheaper. (And if you do not find the plug anywhere on the toilet, you know, you will be on the track and probably a pretty penny for a professional to settle charges)
All addresses are good so far, the only advice I give, turn off the water, then rinse out the sponge as much water as possible to the tank and bowl (yes, gross, but not as bad as with all d that water on the floor around trying to Council on the toilet to find the socket (if it) not just sit there in the pipeline. The head of another is not to tighten the screws, because the toilet is cracked and you have to live with the cracks or get a new toilet.
My favorite home improvement mega-Mart has an online tutorial on how to do it. The toilets are very heavy, and even implemented is not really a job for a first timer, if pRetty practice and what I saw on television a few times. If you do not know what a ring and wax, can be a friend or relative and can not help, I repeat, about how professionals.
Try to become a good friend and ask, "Do you know what is a wax ring for the bathroom, and if they say yes, say:" Great! "I have this little project that needs the help, you're free tomorrow ?
You need the toliet hand to take and closed the valve by its this.It 'sa difficult task, but you can do
First, I can not imagine the game in the size you describe, as in a position to make the first flight, let drain for the P-configuration of the trap of the toilet on the main. In any case, not only good god.
The price of a plumber to give the same answer would probably be $ 40 per hour. Plan to another bathroom.
Are you there against your hand to see if the plug is always the case in the first section?
Instructions step by step? Come on,,, sigh. This is a piece of ceramic shaped device with p-type case, led into the drain. I do not want to offend, but it is very likely if you can not solve, what you said, tried, and a new bathroom is no more than a plumber costs shoukders shrugged, offering the same advice.
Rev. Steven
Post a Comment